Endless Road Quilt Pattern
Lake Block
Fabric Pieces Needed:
(2) 9 1/2 inch squares of your water color
(4) 3 1/2 inch squares background
Draw a diagonal line on all of your 3 1/2 squares. Place RST on the blue fabric (pay attention to the orientation) and sew on the line. Trim a 1/4 inch seam and then press seams open. The water block can replace any two open squares found in the pattern.
Appliqué Houses
I found these appliqué blocks and they are perfect for using on your Endless Road quilt, there are a few house options, trees, and a school bus! I did not design these blocks but they are a free PDF that I found on SuzyQuilts.com.
It is raw edge appliqué and I used an iron on adhesive for mine and then just top stitched with a small stitch length around the edges of all the pieces.
https://u9j4i3a9.stackpathcdn.com/wp-content/uploads/2021/10/SuzyQuilts_PlayMat_Templates.pdf
Plus Block
Fabric pieces needed:
(4) 3 1/2 inch background squares (shown in white)
(2) 3 1/2 inch road squares (shown in black)
(1) 3 1/2 x 9 1/2 inch road rectangle
Sew the squares together with a white on each side of each black square. These will measure 3 1/2 by 9 1/2. Then sew the solid black strip (3 1/2 x 9 1/2) in the middle. Press all seams open.
You may have some leftover pieces from the other strip sets to replace the 3 1/2 inch square sections.
Canva Template
I designed a super interactive Canva template for you to use! It has a photo grid that you can drag and drop the road blocks into and create your own designs. The first link will have all the blocks in all the different orientations, since it is a Canva doc, you need to download the photos to your computer and then upload then into Canva as images. The second link shows the empty design as well as multiple other layout options that I have designed.
(You can scroll through the designs below.)
Endless Road Blocks-
Endless Road Layouts-
